EDGE Elite - Raspberry HVG E-Liquid

For the best experience with this thick 70:30 high-VG Raspberry e-liquid, we recommend using a sub-ohm vape kit/coil rated at 0.8 ohms or below. Standard coils (usually 1.0 ohm or higher) have smaller wicking ports, which can prevent thicker e-liquids like EDGE Raspberry HVG from absorbing properly. This could lead to coil burning or a less than ideal vaping experience. Vape mods are typically designed to handle HVG vape juice, but many pod kits also offer sub-ohm coil options. Check out our range to find the perfect match for you.

The optimal wattage depends on your specific vape kit and coil. Always double-check the instructions that came with your device. As EDGE Elite Raspberry HVG is a 70:30 VG:PG blend, you'll likely find that wattages between 30-60 watts offer a comfortable vape, delivering good flavour definition and impressive vapour clouds (assuming you're using a coil rated at 0.8 ohms or below).

Like all EDGE vape juice, Elite Raspberry HVG is subject to the strictest safety and quality standards. Based in Manchester, England, we have complete control over the manufacturing process, from raw material processing and flavour development to mixing, bottling, and distributing your e-liquids across the UK and beyond.

Everything is done in-house to ensure full compliance with UK regulations (TPD/TRPR), product consistency, and, most importantly, customer satisfaction. Every single product is registered with the MHRA and only approved for sale after they have reviewed the safety and emissions data from our UK labs.

High-VG e-liquids are named for the higher percentage of Vegetable Glycerine (VG) they contain. The vaping world is often divided into two camps: 50/50 and sub-ohm. Our standard Elite and Core ranges, for example, are 50/50 e-liquids, whereas Elite HVG and EDGE MAX are designed for sub-ohm vapers. This means they require more powerful vape kits using coils rated at around 0.8 ohms and below, with some being as low as 0.2 ohms or less – the lower the ohm rating, the more power is needed to effectively vaporise the e-liquid absorbed into the coil's wick.

HVG vape juices produce much thicker vapour clouds as they contain more VG (the ingredient responsible for vapour production), and this carries more flavour, making them taste bolder. They are only available in low nicotine strengths, however, as the larger clouds are very difficult to inhale at high strengths, and their formulation doesn't allow room for enough PG to effectively deliver flavour along with strengths above 3mg/6mg.

EDGE Elite Raspberry HVG e-liquid contains the following ingredients:

Propylene Glycol (PG): A colourless and flavourless base liquid with the consistency of water, used in the manufacture of many foods and medicines. In e-liquid, it acts as a flavour carrier and helps the ingredients form a stable mixture.

Vegetable Glycerol (VG): A colourless and mostly flavourless base with a slight sweetness and thick consistency, used in many household consumables like medicines and food. In e-liquid, it acts as a secondary flavour carrier and produces the vapour clouds we inhale.

Freebase Nicotine: Nicotine molecules freely suspended in a PG base diluted to 7.2% to allow us to accurately dose our e-liquid batches and deliver different strengths.

Elite Raspberry Flavour Concentrate: Highly refined in our labs for our Elite range by our in-house flavour experts to work specifically with e-cigarettes – we make premium flavourings ourselves designed specifically to be vaped for your satisfaction.

Yes, all EDGE e-liquids, including Elite Raspberry HVG, are 100% vegan and vegetarian-friendly – we do not use any animal products in the manufacture of our vape juice. Our PG, VG, nicotine, and flavourings are all plant-based.

All EDGE vape liquids are made in the UK, at our Manchester headquarters. Every aspect of our manufacturing and retail operations is UK-based.

POD stands for produced-on-date. We use this instead of a best before date because of the long shelf life of our e-liquids. We have carefully refined our recipes and production methods to ensure that, provided they are stored correctly.

EDGE e-liquids will remain stable and usable for as much as 2 years after the POD, and even beyond. You can find the POD on the base of your bottle.

The batch number for your bottle of EDGE Elite Raspberry HVG vape juice is located on the bottom of the bottle itself, near the POD. You will need to quote this to our customer service team should you need to raise any concerns with us about your purchase.

You can find all relevant safety information about your e-liquid on the carton provided. This includes safety and hazard statements, ingredients and allergens.

Keep all e-liquids away from direct sunlight and extreme temperatures. Store them upright where possible, with the cap secured.

Please note: Sunlight can cause nicotine to turn darker in colour, but this is natural and does not mean it is unsafe to vape. Extreme heat or cold can change the viscosity of your e-liquid, which can affect its performance in certain vape device types. It can also cause splitting, which will make the e-liquid unpleasant to use as the nicotine concentration will become inconsistent.

This is especially impactful for High-VG vape juice like the Elite HVG or MAX EDGE vaping ranges, which rely on their thickness to perform as intended. Over time, all e-liquids slowly steep – this is the process by which the flavour matures and changes.

Steeping is not a bad thing over short periods, but very old e-liquids can over-steep and become unpleasant to consume.

You can buy EDGE Elite Raspberry HVG right here at the EDGE Vaping store – by buying direct from us, you can earn EDGE loyalty points, as well as access exclusive multi-buy bundles and subscription options. The Elite collection comprises our most highly refined vape flavours and is our exclusive online range, meaning you won't find them anywhere else!